BTC-625S: Clevis, Turned Housing, Inch
Application: inch clevis ends are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point.
Attaching Hardware: Inch clevis spring pins, cotter pins, safety clips, etc. are available in volume. Construction: Similar to DIN 71752. Finish: plated zinc with a yellow dichromate treatment. Material: low carbon steel. Turnbuckle Option: consider using MCP's exclusive turnbuckle clevis to eliminate the need for left hand threads and to allow adjustment of linkage lengths after installation. Cost Savings Tip: cost effective designs should always include the entire rod-nut-yoke assembly, as opposed to purchasing these components separately. Specify the use of clevis spring pins to reduce assembly costs. |
See also |
Part Number | System | Thread | A | B | D | E | F | G | H | I | |
---|---|---|---|---|---|---|---|---|---|---|---|
BTC-625S | Inch | 5/8-18 | 2.510 | 1.024 | 1.260 | 0.6250 | 1.250 | 0.6250 | 3.268 | 1.250 | CAD Model |
|